Carbon Steel Rim Seal Foam Pourer

forede Rim Seal Foam Pourer – consists mainly of Foam Maker, a windshield and an integral deflector. It is designed to deliver fully aspirated foam directly to the annular seal area of open top floating roof tank. The Rim Seal Foam Pourer is used for one of the most common applications of protecting tank seal in vertical liquid storage tank with internal floating roof with low expansion foam system. The application of aspirated foam is on the basis of the risk comprising the area in the annular ring between the rim of the floating roof and the tank shell. The Rim Seal Foam Pourers are widely used with Inline Foam Inductor, Bladder Tank system or Foam tenders.

Maintenance

The filter of Foam Chamber should be cleaned regularly to ensure that the air passage is unblocked;

Carefully unpack Rim Seal Pourer. While unpacking and installation it is to be handled with care and shocks to be avoided. Check visually for any damages. While installing, ensure that the Rim Seal Pourer is not under stress due to any misalignments in installation or variations of system piping. Ensure that the strainer assembly is clear from any blockages or damages. If strainer assembly is either blocked or damaged, it will adversely affect the performance of the equipment.

Qualified and trained person must commission the system. After few initial successful tests, an authorized person must be trained to perform inspection and testing of the system.

FAQ

Q1:How long does it take to produce the product?

Conventional products and small quantities can be produced within 15 days. The specific production time needs to have specific products and product quantities to confirm.

Q2:Is the sample provided for free?

A few small products like sprinkler decorative covers can be provided for free, but the buyer needs to pay for the shipping. Other products need to be confirmed according to the specific situation.

Q3:How to mail the samples?

Small samples are usually sent by express (DHL, UPS, FEDEX, TNT). If the buyer has other opinions, both parties can discuss with each other

Dear Customer,