Rim Seal Foam Pourer for Foam System

forede Rim Seal Foam Pourer – consists mainly of Foam Maker, a windshield and an integral deflector. It is designed to deliver fully aspirated foam directly to the annular seal area of open top floating roof tank. The Rim Seal Foam Pourer is used for one of the most common applications of protecting tank seal in vertical liquid storage tank with internal floating roof with low expansion foam system. The application of aspirated foam is on the basis of the risk comprising the area in the annular ring between the rim of the floating roof and the tank shell. The Rim Seal Foam Pourers are widely used with Inline Foam Inductor, Bladder Tank system or Foam tenders.

Maintenance

To test the foam pourer without discharging the foam into the tank seal area, the foam pourer is to be rotated 180° away from the wind shield. The air screen is to be inspected.periodically for obstruction of air inlet holes. If any obstruction is noticed, remove the same and flush, if necessary. The foam pourer outlet and pourer, if exposed to atmospheric condition, should be periodically

FAQ

Q1:How long does it take to produce the product?

Conventional products and small quantities can be produced within 15 days. The specific production time needs to have specific products and product quantities to confirm.

Q2:Is the sample provided for free?

A few small products like sprinkler decorative covers can be provided for free, but the buyer needs to pay for the shipping. Other products need to be confirmed according to the specific situation.

Q3:How to mail the samples?

Small samples are usually sent by express (DHL, UPS, FEDEX, TNT). If the buyer has other opinions, both parties can discuss with each other