what is portable foam system?
A portable foam system is a device that can provide high-quality foam to effectively extinguish fires or reduce the intensity of flames. It is a compact and reliable system that enables firefighters to easily transport the foam generator to the site of a fire and quickly deploy a foam blanket.
The foam produced by a portable foam system is specially formulated to create a barrier between the fire and the surrounding environment. It coats the fuel source and prevents it from reigniting, reducing the heat and oxygen supply necessary for combustion. This makes it an effective tool in combating fires in different environments, such as industrial facilities, aircraft, and ships.
One of the advantages of a portable foam system is its versatility and ease of use. It can be quickly assembled and disassembled, making it easy to transport and store. It also requires minimal training to operate, allowing firefighters to focus on the task at hand.
Furthermore, the use of a portable foam system is an environmentally friendly solution to firefighting. The foam can be water-based, meaning it does not contain harmful chemicals or substances that could harm the environment.
In conclusion, a portable foam system is an essential tool for firefighters in the fight against fires. It is a versatile, reliable, and environmentally friendly solution that can be used in a variety of situations. With its ease of use and effectiveness, this system provides peace of mind to those who encounter fires in their work or daily lives.
Water pump operation
Preparation before operation: Lead 4 cables from the external power supply area to the water pump control cabinet. The 4 cables are three phase wires U, V, W and a neutral wire, and are connected to the terminals of the control cabinet. When using it for the first time, you need to observe the rotation of the motor. If the motor rotates reversely, you need to adjust the line sequence position between the three phase lines of the motor until the motor rotates correctly. Steps:
A. To operate at full speed, turn the conversion switch to the full speed gear, press the "start" button of the water pump, the indicator light will light up green, and the water pump will start at full speed. B. In the speed-regulating state, turn the switch to the speed-regulating state, press the "start" button of the water pump, and the indicator light will light up green. At this time, you can adjust the speed-regulating knob to adjust the water pump speed (water pressure) arbitrarily.
Valve operation
The valve control box and the fire monitor control box are one control box. The valve control box can operate the foam liquid control valve and the pipe outlet valve respectively. The pipe outlet valve is normally open. When it needs to be closed, press the valve 1 close button (closed). All subsequent outlets cannot discharge water). When you need to use foam liquid, open the foam liquid control valve and press the valve 2 opening button.
Fire monitor operation
The fire monitor control box and the valve control box are one control box. Before operating the fire monitor, wiring needs to be done at the water monitor end, and the corresponding wiring must be done according to the cable identification and terminal identification. The fire monitor control box can control the horizontal and pitch movements of the fire monitor. At the same time, the fire monitor can also be operated using the matching remote control.
operate.
Foam gun operation
There are 3 fire hydrants (DN65) on the device, which are normally closed. Before using the foam gun, you need to close the manual valve (DN100) at the water monitor end and then open any of the fire hydrants. After connecting the water hose and the foam gun, use the foam gun manually to operate.
Water tank replenishment operation
The device is equipped with 2 quick interface (DN100) water replenishment devices. When water replenishment is needed, connect the external water replenishment pipe and open the water replenishment valve to replenish water. The water tank is equipped with a magnetic flap level gauge to facilitate observation of the water level status. At the same time, the water tank is equipped with an overflow port.
E-mail:sales6@forede.com
WSA:+86 158 8080 0883
Hot Tags: portable foam system, China, manufacturers, suppliers, wholesale, price
