Ball Type Check Valve

Product Introduction:

The valve that opens or closes on its own by the force of the flow of the medium to prevent the medium from flowing back is called a check valve. Check valves belong to the category of automatic valves, which are mainly used in pipelines where the medium flows in one direction, and only allow the medium to flow in one direction to prevent accidents.

Send Inquiry

Description

Technical Parameters

Precautions

1. Do not allow the check valve to bear weight in the piping system. Large check valves should be independently supported so that they are not affected by the pressure generated by the piping system.

2. When installing, pay attention to the direction of medium flow should be consistent with the direction of the arrow marked on the valve body.

3. The lift-type vertical flap check valve should be installed on the vertical pipeline.

4. The lift-type horizontal flap check valve should be installed on the horizontal pipeline.

Material	Body	Ductile Iron,QT450
	Screw	SS304 Stainless Steel
	Gasket	NBR
End Connections	Flange × Flange
Flanges	ANSI150LB, BS 5404,GB Standard
Available Size	DN50 thru DN300 (3" thru 12")
Type	Ball Type
Working pressure	16 bar
Color	Red/Blue
Media	Water

Hot Tags: ball type check valve, China, manufacturers, suppliers, wholesale, price, Signal Gate Valve, Silent Type Check Valve, Alarm Check Valve For Sprinkler System, Flanged Flexible Disc Check Valve, Deluge Valve For Sprinkler System, Fire Alarm Valve

1) Flange End:ANSI150LB/BS5404;

2) Screw Material:SS304 Stainless Steel;

3) Gasket Material:DUCTILE IRON;

4) Body Material:Ductile Iron,QT450;

5) Disc Material:Ductile Iron,QT450,COVERD BY NBR;

6) Surface Finishing:Epoxy Red or Blue.