Fixed oscillating flange for fire water monitor as the title shows, this product is fixed installation, and fire water monitor can install on the oscillating flange. Fixed oscillating flange for fire water monitor is a hard coated anodized aluminium alloy construction with stainless steel cover. The flow rate of fixed oscillating flange for fire water monitor can reach from 600 LPM to 4800LPM, the inlet size is 4", the outlet size is 3",while the standard of inlet and outlet are optional. The oscillating speed can reach 3 rounds per minute.
Important thing is the oscillating angle is adjustable, they are 30°,60°,90°,120°,140°,165°,all these are available, then operator can choose the best themselves.
Fixed oscillating flange for fire water monitor is a total water-powered product, it can working without any electricity.
Model Number | OSC100-SX |
Minimum W.Pressure | 2.8 bar |
Maximum W.Pressure | 14 bar |
Minimum Flow Rate | 600 LPM |
Maximum Flow Rate | 4800 LPM |
Oscillating Angle | 30° /60° /90°/120°/140°/165° Adjustable |
Oscillating Speed | 3 round per minute |
Inlet & Outlet | 4" DN100 BS4504 is standard,3" DN80 and other standard available |
Weight | Approx. 25 KGS |
Color | Red/Yellow/Natural stainless steel |
Material | Body - Hard coated anodized aluminium alloy Cover - SS304 Stainless steel |
FAQ:
Q: What is the application of Oscillating monitors?
Certain fire hazards require the cooling of large hazard areas using water application. Similarly, it may be required to apply foam over a large area in some situations, instead of specific point application. This can be achieved by using oscillating monitors, as the monitor oscillates in the horizontal plane, providing coverage to a large area instead of a specific location. Oscillating Foam/ Water Monitors use gear boxes and mechanical means to oscillate the monitor in a preset angle. The power for movement can be an external power source or can be aqua powered (i.e. using a small quantity of the water supplied to the monitor). Aqua powered units are preferred as they do not require any external power source. These are also recommended where unmanned operation is necessary in view of severe fire hazards.
Q: Can I have a sample order?
Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Hot Tags: fixed oscillating flange for fire water monitor, China, manufacturers, suppliers, wholesale, price, Spray Nozzles, Handline Nozzle, Automatic Remote Control Fire Monitor
1) Aluminium alloy construction,stainless steel cover;
2) Easily transforms a manual monitor to a oscillating monitor;
3) Totally water-powered,without any electricity power;
4) Oscillating angle adjustable;
5) 4 inch inlet and outlet flange;
6) Flange standard: BS4504,ANSI150,GB,etc.
