Early Suppression Fast Response Sprinkler Heads

Early Suppression Fast Response Sprinkler Heads
Product Introduction:
forede K25(363) Early Suppression Fast Response Fire Sprinkler Heads are installed in places where the slope of the building roof or ceiling does not exceed 170mm/m. The sprinkler splash plate must be installed parallel to the ceiling or ceiling. The nozzle spacing should not be less than 2.4m and should not be greater than 3.7m. When the height of the protected object is greater than 7.5m or the clearance height of the protected space is greater than 9m, the nozzle spacing should not be greater than 3m.
Description
Technical Parameters

The sprinkler can quickly respond to the spreading high-risk fire, and under the combined action of large water droplets and fast flow rate, it can spray a large amount of water in time to extinguish the fire, not just control the fire.


According to NFPA standards and FM standards, it is confirmed that the sprinkler can be used in warehouses up to 12.2m and shelves up to 11m in height. The splash plate and frame of this type of sprinkler form a wide symmetrical area, so as to ensure that while the sprinkler extinguishes the fire on the upper part of the shelf, a powerful water column in the center of the sprinkler can pass through the shelf to extinguish the fire at the bottom of the shelf under the sprinkler.



forede Early Suppression Fast Response Fire Sprinkler Heads are mainly composed of frame, sealing element, ball seat, spring, action mechanism, fusible alloy sheet, screw, splash plate, etc.They are installed in places where the slope of the building roof or ceiling does not exceed 170mm/m,uses fusible alloy welding parts as the temperature sensing element,has special advantages for protecting high-stack and high-bay warehouses.


The Specification of Early Suppression Fast Response Fire Sprinkler Heads

K FACTORK25@US(363@Metric)
Thread SizeDN25(1")
Connecting ThreadBSP(NPT Optional)
Main MaterialBrass
Sensitive Element Fusible Alloy
Seal Material NBR(Teflon Optiona)
Surface Finishing
Natural Brass
Temperature74°C,100°C


The FAQ of Early Suppression Fast Response Fire Sprinkler Heads


Q1:Is the sample of Early Suppression Fast Response Fire Sprinkler Heads provided for free?
A few small Early Suppression Fast Response Fire Sprinkler Heads like sprinkler decorative covers can be provided for free, but the buyer needs to pay for the shipping. Other products need to be confirmed according to the specific situation.


Q2: Where is your company?
NO. 1,Building 29#,B Zone,Chenghui International Trading Market,Xiamei Town,Nan'an City,Fujian Province,China.


Q3:How many agents the company currently has overseas?
Currently we have 2 agents abroad. One in Israel and one in Maldives.

 

Hot Tags: early suppression fast response sprinkler heads, China, manufacturers, suppliers, wholesale, price, Sprinkler Accessories, Upright ESFR Sprinklers, K17 Fire Sprinkler Heads, Fire Fighting Monitor With Remote Control, Automatic Fire Fighting Monitor, Breeching Inlet

1)Use the fusible alloys as sensitive components has stable performance, precise operating temperature, and fast response speed.

2)By installing ESFR sprinkler heads in the overhead system, the layered sprinkler heads on each shelf can be eliminated, thus simplifying the system and saving investment costs.



Send Inquiry
Quanzhou Forede Firefighting Equipment Co.,Ltd
contact us