Products Description

Overview
Foam Bladder Tank With Electric Ball Valve is a pressure-type foam proportioning equipment. The inner rubber bladder stores foam concentrate. When fire water enters the tank shell, water pressure squeezes the bladder to push foam liquid out. The electric ball valve is installed on foam outlet / water inlet / bypass pipeline for automatic remote on-off control, to realize automatic foam supply linkage with fire alarm system.
The whole set normally includes carbon steel tank body, nitrile rubber foam bladder, electric ball valve, proportioner, pressure gauge, safety valve, drain valve, air vent, flange connections and supporting accessories.
Products Parameters

FAQ
Q: What is the working principle?
1. In standby status: The bladder is pre-filled with foam concentrate, the tank cavity is empty, all valves are closed; electric ball valve keeps normally closed.
2. Fire alarm signal triggers: Fire pump starts, electric ball valve receives signal and opens automatically. Pressurized fire water enters the annular space between tank shell and bladder.
3. Water pressure compresses the flexible bladder, extruding foam concentrate out of the bladder, flowing through the proportioner.
4. Foam concentrate mixes with fire water at a fixed ratio (3% or 6%) to form foam solution, then delivered to foam generators, foam monitors or sprinkler nozzles.
5. After fire extinguishing: System reset, electric ball valve closes automatically, residual liquid drained, bladder refilled with foam concentrate for standby.
Q: What foam mixing ratios are available?
Standard options: 3% and 6%.
- 3%: For AFFF, AR-AFFF aqueous film-forming foam
- 6%: For common protein foam, fluoroprotein foam
Custom ratio design is available upon special project requirements.
Note: The electric ball valve itself does not adjust mixing ratio; ratio is determined by the proportioner specification.
Q: What are the common tank volume options?
Standard volumes: 500L, 1000L, 1500L, 2000L, 3000L, 4000L, 5000L, 6000L, 8000L, 10000L.
Working pressure range: 0.6MPa ~ 1.6MPa (PN10 / PN16 are mainstream).
Design pressure: 1.6MPa; test pressure: 2.4MPa.
Related Products
Contact Us
Hot Tags: Foam Bladder Tank With Electric Ball Valve, China, manufacturers, suppliers, wholesale, price, Fire Foam Tank, Foam Branch Pipe, Vertical Foam Tank, Foam Bladder Tank Fixed, Bladder Tank, Horizontal Foam Bladder Tank





























