Alarm Check Valve For Sprinkler System

Alarm Check Valve For Sprinkler System
Product Introduction:
ZSFZ wet alarm valve device is composed of wet alarm valve, retarder chamber, hydraulic alarm bell, pressure switch, drain valve, filter and so on.
Send Inquiry
Description
Technical Parameters

Wet alarm valve is a cover plate alarm valve, which is mainly composed of a valve body, a seat ring and a valve clack. The entire valve body is divided into an upper and a lower cavity by the valve clack. The upper cavity (system side) is connected to the system pipe network. The lower cavity (water supply side) is connected to the water source, and the valve body is equipped with a seat ring. On the seat ring, there are a plurality of groove holes leading to the water inlet pipe of the retarder.

When the system is in the servo state, the groove or hole on the seat ring is covered and closed by the valve flap, and the alarm water channel leading to the hydraulic alarm bell is blocked; when the upper and lower pressure difference reaches a certain value, the valve flap opens ( Differential pressure start), the water flows from the water supply side to the system side, the alarm bell alarms, and the water extinguishing system sprays water; when the upper and lower pressures are frequently opened, there is a small water make-up valve on the valve disc. When leakage or water source pressure fluctuates, the water supply valve can be used to supply water to the pipe network to balance the pressure in the upper and lower chambers, stabilize the valve flap, and avoid false alarms.



Material

Body

Ductile iron

Clapper

SS304 w/NBR

Pipes

SS304

Ball valve & strainer & check valve

Brass

Water motor gong

SS304

Working pressure

12 bar 

Sealing testing  pressure

24 bar

Applicable temperature

4°C to 70°C

Installation

Vertically

Flow switch contact capacity

DC24V,0.5A

Connection

Flange × Flange

Available Size

DN80 thru DN250 (3" thru 10")


 

Hot Tags: alarm check valve for sprinkler system, China, manufacturers, suppliers, wholesale, price, Foot Type Valve With Strainer, Groove Type Alarm Check Valve, Grooved Wet Type Alarm Valve, Groove Type Alarm Valve, Grooved Wet Type Alarm Check Valve, Galvanized Type Alarm Check Valve

1) Ductile iron construction valve body,less weight and extra strength.

2) Easy maintenance just require to disassemble the valve cover .

3) The all moving parts can be serviced without removing the valve from the installed position.  

4) Simple design for easy installation and operation.

5) Vertical installation.

6) CCCF certificated.


Send Inquiry
Quanzhou Forede Firefighting Equipment Co.,Ltd
contact us