Self Oscillating Fire Water Monitor

Self Oscillating Fire Water Monitor suppliers

Self Oscillating Fire Water Monitor factory

Self Oscillating Fire Water Monitor best

Product Introduction:

The FOREDE® Brand OSC100-SX Water-Powered Oscillating Device provides unparalleled performance with simple, yet rugged design features in a compact construction. The device is designed to provide an oscillating water or foam stream over a pre-set area of protection. The device can be supplied with FOREDE® monitor series, which are available with flow rate from 150 up to 1250 GPM (600 to 4800 LPM) at 50-145 psi (3.5-10 bar) inlet nominal working pressure to the device connection.

Send Inquiry

Description

Technical Parameters

Products Description

forede OSC100-SX Gun base, nozzle, water outlet elbow, screw, rotary handle, push rod, compression handwheel, circular transmission plate, horizontal bevel gear shaft, vertical bevel gear shaft, impeller, drive housing and bottom plate, etc. The pressure water drives the impeller to rotate, and through the horizontal bevel gear shaft and the vertical bevel gear shaft that mesh with each other, the power is transmitted from the horizontal direction to the vertical circular transmission plate, and the push rod drives the outlet elbow to move freely in the horizontal direction. turn. At the same time, by turning the rotating handle, the position of the gun head ball core in the water outlet elbow can be adjusted, so that the pitch angle of the gun head will change accordingly. By operating the horizontal self-swinging device of the gun body and the pitching and swinging device of the gun head, the angle change of the horizontal and pitching directions of the fire water monitor can be realized, and the fire-fighting coverage of the fire water monitor can be effectively increased. The utility model has the advantages of simple structure, convenient and flexible operation, and is especially suitable for fire extinguishing occasions with strong mobility and difficult access.