Fire monitors are a type of security equipment currently used in domestic fire fighting. Fire monitors include manual fire monitors, electronically controlled fire monitors, automatic fire monitors, explosion-proof automatic fire monitors, and explosion-proof electronically controlled fire monitors The wiring method of each kind of equipment is different. ZDMS series automatic fire water monitors are mostly used in China. They are mainly used in the interior of tall buildings, such as factories, commercial centers, cinemas, stadiums, libraries and cultural exhibition centers As long as the current indoor height is greater than 6m, it is necessary to design and install the corresponding type of automatic fire water monitor according to the requirements of the fire department. At present, automatic fire water monitors generally use three control methods: automatic, manual, and remote. Of course, electric fire water monitors require remote control for remote control.
The automatic fire water monitor has a third-party alarm host to act as an alarm. It can realize the detection of flames. It can remotely control the scene scene through the fire control room. It has a large protection area and fast response speed. Loss.
Automatic fire water monitor wiring:
(1) Water monitor to the field area control box: RVV3x1.5 (water monitor power line 220V) + RVSP2x1.5 (water monitor control line)
(2) Solenoid valve to the field area control box: RVV2x1.5 (solenoid valve power cable)
(3) On-site area control box to end water test device: RVV3x1.5 (power cable for end water test device) + RVSP2x1.5 (signal bus)
(4) On-site area control box to fire alarm host: RVV3x2.5 (power line) + RVSP2x1.5 (signal bus) + RVSP2x1.5 (remote control line)
(5) Water cannon to fire alarm host: SYV-75-5 (video cable). (When the water cannon does not have video, no video or remote control cable is needed, and the system does not have remote control function.)
(6) Fire alarm host to pump room: RVV4x1.5 (start pump line, start pump feedback line).
