Performance characteristics of rubber soft connection:
1. Small size, light weight, good flexibility, easy installation and maintenance.
2. After installation, it can absorb the horizontal, axial and angular displacement caused by pipeline vibration; it is not limited by the concentricity of the pipeline and the non-parallel flange.
3. After installation, the noise generated by the vibration of pipelines and pumps can be reduced, and the vibration absorption ability is strong.
4. The internal seamless high-pressure rubber soft connection can effectively prevent the corrosion of the inner wall of the rubber soft connection by the corrosive medium in the high temperature, acid-base, and oil-resistant pipelines, and increase the service life.
Application field of soft rubber connection
Due to the good comprehensive performance of flexible rubber, this product is widely used in basic projects such as chemical industry, construction, water supply and drainage, petroleum, light and heavy industry, refrigeration, sanitation, plumbing, fire protection, and electric power. Single ball rubber soft connection. According to different materials, it can be made into various varieties such as acid resistance, alkali resistance, corrosion resistance, oil resistance, high temperature resistance, radiation resistance, wear resistance, aging resistance, etc., and can adapt to various media and environments.
Installation Precautions:
1. When installing the rubber soft connection, it is strictly forbidden to install beyond the displacement limit.
2. When the rubber soft connection is installed on a flat ground, suspended or vertically installed, the actual working axis displacement pressure of the rubber soft connection is less than the supporting force of the pipeline. Otherwise, an anti-detachment device should be installed to prevent the detachment under pressure during work.
3. The pipeline must have a fixed bracket or a fixed bracket, and the force of the fixed bracket must be greater than the axial force. For vertical installation and overhead installation, corresponding fixing brackets and load-bearing brackets must be installed at both ends of the product to prevent the product from being pulled out after being compressed.
4. The mounting bolts should be tightened symmetrically and gradually to prevent local leakage.
5. Keep away from heat sources during installation, and it is strictly forbidden to use media that do not meet the requirements of this product.
