The use of fire water collectors:
A water collector is a device that combines two streams of water into one stream. The check valve controls the flow of water only in, not out. the goal of.
1. The distribution manifold in the water separator and collector system manages many branch pipes, which are equipped with automatic thermostatic valves with exhaust valves, etc. , and flows into the distribution manifold. After the impurities are isolated by the filter, the water is evenly distributed into the circuit, and after superheating and exchange, the water returns to the main rod, and then flows into the heating system through the water return port.
2. The water separator and collector can also adjust the temperature. If the flow of boiling water is large and the water circulation is fast, the indoor temperature will be high; if the valves of each channel are half-opened or the amount of hot water in a single half-open pipe decreases, the water circulation will slow down, and the corresponding indoor temperature will be low, and the water separator and water collection can be used well to adjust the indoor temperature.
3. The use of water distributors and water collectors in the tap water supply system effectively avoids loopholes in tap water management, and centralized installation and management of water meters, combined with single-pipe multi-channel use, reduces the purchase cost of pipelines and greatly reduces construction time. Increased efficiency.
