Products Description
Overview & Operation
When greater foam expansion rates are needed, our Foam Tubes Steps in. Light-weight and quick to attached and detach. Large air inlets and hydro-verter screen built in for the optimum quality finished foam.
Operating Instructions:
1. Turn the locking cam round side out;
2. Position the unit at a 45 angle to the bumper of the nozzle
with the two ears on the foam tube base under the lip and
between the lugs of the bumper;
3. Push the base over the bumper of the nozzle;
4. Rotate the locking cam into the fully locked position;
Notices:
* Fully engage locking cam before operating;
* 760 lpm maximum flow;
* Do not operate in wide fog.
*Sizes to fit any FOREDE handline nozzles
