Products Description
Blabber Mouth Foam Monitors
The Blabber Mouth Foam Monitors are engineered to deliver superior firefighting capabilities with robust performance and reliable operation. Available in three models - TFS1.AY024, TFS1.AY032, and TFS1.AY040 - these foam monitors cater to a variety of demanding fire suppression needs, combining efficiency and durability in one powerful solution.
Key Specifications and Advantages:
- **Flow Rate:** With flow capacities of 1440 LPM, 1920 LPM, and 2400 LPM respectively, these monitors ensure an optimal volume of water and foam mixture to combat fires effectively.
- **Working Pressure:** Operating consistently at 8 bar, the units maintain strong and stable pressure for dependable jetting every time.
- **Water Jetting Range:** The water jetting reach ranges from an impressive 55 meters to 65 meters, providing extensive coverage to control and extinguish fires at a safe distance.
- **Foam Jetting Range:** Foam discharge distances from 42 meters to 55 meters allow for precise and effective application of firefighting foam, enhancing suppression efficiency.
- **Body Material:** Constructed from high-quality stainless steel, the monitors benefit from excellent strength, corrosion resistance, and long service life, suitable for various environments.
- **Flange Inlet:** Equipped with 3"/4" BS4504 flanges, facilitating easy installation and compatibility with standard piping systems.
Products Detailed


Technical Parameter
How to Use the Blabber Mouth Foam Monitors?
1. Preparation Before Use
- **Check the Monitor:** Ensure the foam monitor is securely mounted and connected to the water and foam supply lines. Confirm that all couplings and connections are tight and leak-free.
- **Verify Supply Pressure:** The working pressure should be at 8 bar, as specified for optimal performance.
- **Select the Correct Model:** Choose the model based on your required flow rate and jetting range:
- TFS1.AY024: 1440 LPM, foam jetting range up to 42 m
- TFS1.AY032: 1920 LPM, foam jetting range up to 48 m
- TFS1.AY040: 2400 LPM, foam jetting range up to 55 m
---
2. Connecting the Foam and Water Supply
- **Flange Inlet Connection:** The monitor features a 3"/4" BS4504 flange inlet. Make sure to securely fasten the inlet flange to your pipeline according to standard procedures.
- **Foam Mixing:** Connect the foam concentrate supply line to the foam inlet. Ensure that the foam proportioning system is correctly calibrated to allow proper mixing with water.
---
3. Operating the Foam Monitor
- **Activate Water Flow:** Open the water valve slowly to pressurize the system. Monitor for any leaks or irregularities.
- **Engage Foam Injection:** Turn on the foam concentrate system so that foam mixes with the water.
- **Aim the Monitor:** The Blabber Mouth design allows for easy maneuvering. Use the adjustable controls to direct the foam jet precisely to the fire or target area.
- **Adjust Flow Rate if Needed:** Depending on the model and firefighting needs, adjust the flow rate to maximize efficiency.
- **Utilize Jetting Ranges:** Take advantage of the long water and foam jetting ranges (up to 65 m for water and 55 m for foam in model TFS1.AY040) to reach distant fire sources safely.
---
4. Post-Operation Maintenance
- **Flush the System:** After use, flush the foam monitor with clean water to remove any residual foam concentrate and prevent clogging.
- **Inspect for Wear:** Regularly inspect the stainless steel body and moving parts to ensure longevity and maintain peak performance.
- **Lubricate Moving Parts:** Keep the rotating and pivoting mechanisms well-lubricated to enable smooth operation.
|
Model Number |
TFS1.AY024 | TFS1.AY032 | TFS1.AY040 | ||
|---|---|---|---|---|---|
| Flow Rate | 1440 LPM | 1920 LPM | 2400 LPM | ||
|
Working Pressure |
8 bar |
8 bar | 8 bar | ||
| Water Jetting Range | 55 m |
60 m |
65 m | ||
| Foam Jetting Range | 42 m | 48 m | 55 m | ||
| Body Material | Stainless steel | ||||
| Flange Inlet | 3"/4" BS4504 | ||||
Application Area

Rescue Services

Residential Buildings

Industrial Settings

Public Space
Frequently Asked Questions
Q: Can I choose the specifications of the fire monitor?
Q: How to Use Fire Monitor?
Q: Can the Monitor Head of the Fire Monitor Be Replaced?
Q: What Are the Flange Standards for Fire Monitors?
forede® Fire Monitor System Series










forede® Main Products
How to contact us?
Our address
Nan'an City, Quanzhou City Fujian PRC-china
Phone Number
Hot Tags: blabber mouth foam monitors, China, manufacturers, suppliers, wholesale, price, Multi Purpose Fire Nozzles, Cast Iron Fire Hydrant, Fixed Water Monitor, Manual Fire Water Monitor, Fire Water Monitor Fire Fighting, Fixed Manual Water Monitor


























