Products Description
Blabber Mouth Foam Monitors
**Model Variants:** TFS1.AY024 | TFS1.AY032 | TFS1.AY040
- **Flow Rate:** Ranging from 1440 to 2400 Liters Per Minute (LPM), these monitors offer flexibility to suit various operational demands:
- TFS1.AY024: 1440 LPM
- TFS1.AY032: 1920 LPM
- TFS1.AY040: 2400 LPM
- **Working Pressure:** Consistent performance at 8 bar, ensuring optimal pressure for every application.
- **Water Jetting Range:** Efficient water throw capability from 55 meters up to 65 meters, providing wide coverage in critical situations.
- **Foam Jetting Range:** Powerful foam projection spanning 42 to 55 meters, maximizing firefighting foam reach.
- **Body Material:** Constructed with durable stainless steel, offering outstanding corrosion resistance and long-lasting service life.
- **Flange Inlet:** Compatible with 3"/4" BS4504 flange standards for easy integration into existing systems.
The **White Blabber Mouth Foam Monitors** combine engineering excellence with robust materials to deliver dependable and powerful foam jetting solutions. Whether deployed in industrial facilities, airports, or fire brigades, these monitors enhance operational efficiency and safety by reliably directing large volumes of foam and water exactly where needed.
Products Detailed
Technical Parameter
How to Use the Blabber Mouth Foam Monitors?
#### 1. **Installation and Setup**
- Ensure the foam monitor is securely installed using the appropriate flange inlet connection (3" or 4" BS4504). Tighten the connections firmly to prevent leaks.
- Connect the monitor to a reliable foam concentrate supply system and water source capable of delivering the recommended flow rates and working pressure (8 bar).
- Confirm that all control valves are in the closed position before initiating water or foam flow.
#### 2. **Preparation Before Operation**
- Check that the stainless steel body and nozzle are free from any obstruction or damage.
- Verify that the foam concentrate is compatible and mixed properly with water according to your firefighting requirements.
- Ensure all operators are familiar with the monitor's controls, including aiming direction and flow adjustment mechanisms.
#### 3. **Operation**
- Gradually open the water supply valve to start the water flow, observing the monitor's response.
- Slowly introduce foam concentrate into the system, allowing the monitor to blend foam and water to create an effective foam stream.
- Aim the foam jet towards the base of the fire or designated hazard with smooth, controlled movements for maximum coverage.
- Utilize the monitor's range capabilities:
- Aim for distances up to 42 m for TFS1.AY024, 48 m for TFS1.AY032, and 55 m for TFS1.AY040 when foam jetting.
- For water jetting, expect effective streams reaching 55 m, 60 m, and 65 m respectively, ensuring you maintain a safe distance.
#### 4. **Adjustment and Control**
- Use the monitor's control mechanism to adjust the direction and angle of the jet for optimal firefighting coverage.
- Monitor the flow rate and pressure to maintain consistent performance. The monitor is designed to operate efficiently at 8 bar pressure.
- Conduct periodic sweeping motions to cover larger fire or spill areas, leveraging the monitor's long-range foam projection abilities.
#### 5. **Post-Operation Care**
- Once firefighting or training is complete, slowly shut off the foam concentrate supply and then the water supply to prevent water hammer.
- Drain any remaining foam solution from the monitor.
- Clean the nozzle and external surfaces to maintain the stainless steel body's durability and appearance.
- Store the monitor in a safe, accessible location for future readiness.
|
Model Number |
TFS1.AY024 | TFS1.AY032 | TFS1.AY040 | ||
|---|---|---|---|---|---|
| Flow Rate | 1440 LPM | 1920 LPM | 2400 LPM | ||
|
Working Pressure |
8 bar |
8 bar | 8 bar | ||
| Water Jetting Range | 55 m |
60 m |
65 m | ||
| Foam Jetting Range | 42 m | 48 m | 55 m | ||
| Body Material | Stainless steel | ||||
| Flange Inlet | 3"/4" BS4504 | ||||
Application Area
Rescue Services
Residential Buildings
Industrial Settings
Public Space
Frequently Asked Questions
Q: Can I choose the specifications of the fire monitor?
Q: How to Use Fire Monitor?
Q: Can the Monitor Head of the Fire Monitor Be Replaced?
Q: What Are the Flange Standards for Fire Monitors?
forede® Fire Monitor System Series
forede® Main Products
How to contact us?
Our address
Nan'an City, Quanzhou City Fujian PRC-china
Phone Number
Hot Tags: white blabber mouth foam monitors, China, manufacturers, suppliers, wholesale, price, Automatic Fire Monitor, Dry Riser Landing Valve, Elevated Fire Monitor, Fixed Foam Monitor, Fixed Manual Water Monitor, Manual Water Cannon
