The foam generator is mainly composed of three parts: the shell group, the foam nozzle group and the guide plate group.
When the foam mixture flows through the nozzle of the generator, a diffuse atomized jet is formed, and a negative pressure is generated around it, thereby inhaling a large amount of air to form air foam, which is input into the storage tank through the foam nozzle and guide plate, along the tank wall Drip down and cover the surface of the burning liquid smoothly.
The air foam generator consists of the following parts:
1,Sealing glass
2, glass pressure ring
3, nozzle
4, filter screen
5, cover plate
6, shell
7, foam nozzle group
8, shell group
9, guide plate group
Air foam generator use and maintenance:
1. It should be noted that there is no sundry in the supplied mixture, so as not to block the generator.
2. Make sure that the suction hole of the generator is unblocked and not blocked by debris.
3. Always check whether the generator is in good condition, and replace any damaged parts in time.
